C8051F580

Analog Peripherals - 12-Bit ADC Up to 200 ksps Up to 32 external single-ended inputs VREF from on-chip VREF, external pin or VDD Internal or external start of conversion source Built-in temperature sensor - Three Comparators Programmable hysteresis and response time Configurable as interrupt or reset source Low current On-Chip Debug - On-chip debug circuitry facilitates full speed, non- intrusive in-system debug (no emulator required) - Provides breakpoints, single stepping,  inspect/modify memory and registers - Superior performance to emulation systems using ICE-chips, target pods, and sockets - Low cost, complete development kit Supply Voltage 1.8 to 5.25 V - Typical operating current: 15 mA at 50 MHz; Typical stop mode current: 230 µA High-Speed 8051 µC Core - Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks - Up to 50 MIPS throughput with 50 MHz clock - Expanded interrupt handler Automotive Qualified - Temperature Range: –40 to +125 °C C8051F58x/F59x Mixed Signal ISP Flash MCU Family Memory - 8448 bytes internal data RAM (256 + 8192 XRAM) - 128 or 96 kB Banked Flash; In-system programma- ble in 512-byte Sectors - External 64 kB data memory interface programma- ble for multiplexed or non-multiplexed mode Digital Peripherals - 40, 33, or 25 Port I/O; All 5 V push-pull with high sink current - CAN 2.0 Controller—no crystal required - LIN 2.1 Controller (Master and Slave capable); no crystal required - Two Hardware e...