Mixed Signal ISP Flash MCU
Capacitance to Digital Converter - Supports buttons, sliders, wheels, and capacitive
proximity sensing
- Fast 40 µs per ...
Description
Capacitance to Digital Converter - Supports buttons, sliders, wheels, and capacitive
proximity sensing
- Fast 40 µs per channel conversion time
- 16-bit resolution
- Up to 16 input channels
- Auto-scan and wake-on-touch
- Auto-accumulate 4x, 8x, 16, 32x, and 64x samples
Analog Peripherals - 10-Bit ADC
Up to 500 ksps Up to 16 external single-ended inputs VREF from on-chip VREF, external pin or VDD Internal or external start of conversion source Built-in temperature sensor - Comparator Programmable hysteresis and response time Configurable as interrupt or reset source On-Chip Debug - On-chip debug circuitry facilitates full speed, nonintrusive in-system debug (no emulator required)
- Provides breakpoints, single stepping, inspect/modify memory and registers
- Superior performance to emulation systems using ICE-chips, target pods, and sockets
- Low cost, complete development kit
C8051F80x-83x
Mixed Signal ISP Flash MCU Family
High-Speed 8051 µC Core - Pipelined instruction architecture; executes 70% of
instructions in 1 or 2 system clocks - Up to 25 MIPS throughput with 25 MHz clock - Expanded interrupt handler Memory - Up to 512 bytes internal data RAM (256 + 256) - Up to 16 kB Flash; In-system programmable in
512-byte sectors Digital Peripherals - 17 or 13 Port I/O with high sink current - Hardware enhanced UART, SMBus™ (I2C compati-
ble), and enhanced SPI™ serial ports - Three general purpose 16-bit counter/timers - 16-Bit programmable counter array (PCA) with ...
Similar Datasheet