CAT705, CAT706, CAT813
µP Supervisory Circuits
FEATURES
Accurate under voltage system monitoring ¯¯¯¯¯¯ guaranteed va...
CAT705, CAT706, CAT813
µP Supervisory Circuits
FEATURES
Accurate under
voltage system monitoring ¯¯¯¯¯¯ guaranteed valid for VCC = 1.0V RESET 6µA supply current
www.DataSheet4U.com 200ms
DESCRIPTION
The CAT705, CAT706, and CAT813 provide reset and monitoring functions for the electronic systems. Each device monitors the system
voltage and maintains a reset output until that
voltage reaches the device’s specified trip value and then maintains the reset output active condition until the device’s internal timer allows the system power supply to stabilize. The CAT705, CAT706, and CAT813 have a watchdog input which can be used to monitor a system signal and cause a reset to be issued if the signal fails to change state prior to a timeout condition. ¯¯¯¯¯¯ The CAT705 and CAT706 provide a manual RESET input which initiate reset if pulled low. The CAT705, CAT706 and CAT813 provide a RESET output which is low for the CAT705 and CAT706, but high for the CAT813. There is a secondary supply monitor included for power-fail warning (pin PFI). The CAT706 has a threshold
voltage 4.40V. The CAT705/ CAT813 have a threshold
voltage of 4.65V. For Ordering Information details, see page 13.
RESET pulse width
Watchdog timer function 1.6 sec timeout Brownout detection system reset for use with 3.0, 3.6, and 5.0 volt systems Pin and function compatible with the MAX705/706/813L products Operating Range from -40°C to +85°C Available in SOIC 8-lead and MSOP 8-lead packages
APPLICA...