CDCVF25081
SCAS671B – OCTOBER 2001 – REVISED JANUARY 2022
CDCVF25081 3.3-V Phased-Lock Loop Clock Driver
1 Features
• P...
CDCVF25081
SCAS671B – OCTOBER 2001 – REVISED JANUARY 2022
CDCVF25081 3.3-V Phased-Lock Loop Clock Driver
1 Features
Phase-locked loop based, zero-delay buffer – 1 clock input to 2 banks of 4 outputs – No external RC network required
Supply
voltage: 3 V to 3.6 V Operating frequency: 8 MHz to 200 MHz Low additive jitter (cycle-cycle): ±100 ps for
66 MHz to 200 MHz Power-down mode available
– Current consumption: < 20 µA in
Power-down mode 25-Ω on-chip series damping resistors Industrial temperature range: –40°C to 85°C Spread Spectrum Clock Compatible (SSC) Packaged in
– 9.9-mm × 3.91-mm, 16-pin SOIC (D) – 5.0-mm × 4.4-mm, 16-pin TSSOP (PW)
2 Applications
Defense radio Production switchers and mixers Radar In-vitro diagnostics CT & PET scanner
3 Description
The CDCVF25081 is a high performance, low skew, low jitter, phased-locked loop clock driver. It uses a PLL to precisely align, in both frequency and phase, the output clocks to the input clock signal. The outputs are divided into 2 banks for a total of 8 buffered CLKIN outputs. The device automatically puts the outputs to a low state when no CLKIN signal is present (power down mode).
The S1 and S2 pins allow selection between PLL or bypassed PLL outputs. When left open, the outputs are disabled to a logic low state.
The part supports a fail-safe function. The device further incorporates an input hysteresis which prevents random oscillation of the outputs in the absence of an input signal.
Th...