CG8010
Data Sheet
:POWER SUPPLY SUPERVISOR WITH PWM CONTROLLER
:CG8010 :Rev 0.30 :October 4, 2007 :8
:2007/10/05
Oc...
CG8010
Data Sheet
:POWER SUPPLY SUPERVISOR WITH PWM CONTROLLER
:CG8010 :Rev 0.30 :October 4, 2007 :8
:2007/10/05
October 4, 2007 – Rev. 0.30 YT
CG8010
POWER SUPPLY SUPERVISOR WITH PWM CONTROLLER
The CG8010 is designed with a pulse-width-modulation control circuit and a complete power supervisor for use in the switched mode power supply .
It contains various functions, like under
voltage protection (UVP), over
voltage protection (OVP), power good output (PG) and ON/OFF control (REM).
UVP(Under
voltage protection) function is for +3.3V, +5V, +12V outputs. OVP(Over
voltage protection) function is for +3.3V, +5V, +12V and PT is for extra protection input. PG(Power good signal) is a safe operation signal to inform the external parts. REM(Remote on/off) is used to control the SMPS on/off. The REM control signal has the on/off transferred debounce–time.
FEATURE ■ 3-channel under
voltage protection (UVP) ■ 3-channel over
voltage protection (OVP) ■ 1-channel extra protection (PT) ■ 1-channel sense input to control the PG (SEN) ■ Remote on/off control function (REM) ■ Dual output for push-pull operation (OP1/OP2) ■ Soft start capability by external capacitor (SS) ■ VCC under
voltage lockout ■ 16-Pin dual in-line package ■ Pb-free Package are available
ORDERING INFORMATION
ORDER NUMBER CG8010DX16
Package DIP-16 (Pb-free)
Shipping Tube
REFERENCE APPLICATION CIRCUIT
PIN CONFIGURATION (Top View)
V33 V5
V12 PT
GND RT
OP1 OP2
1 2 3 4 5 6 7 8
16 POS 15 NEG 14 COMP 13 VCC 12 SE...