Resistors. CHP0805 Datasheet

CHP0805 Datasheet PDF

Part CHP0805
Description Ultra-High Power Chip Resistors
Feature CHP0805; HALORGoEHNS FC&ROEME*P*LI*ANT** *RoHS COMPLIANT 01B Features n Thick film technology n Power ra.
Manufacture BOURNS
Datasheet
Download CHP0805 Datasheet




CHP0805
01B
Features
n Thick film technology
n Power rating up to 3 watts @ 70 °C
n High power surge withstanding
n RoHS compliant*
n Halogen free**
Applications
n Power supplies
n Digital meters
n Consumer electronics
n LED lighting
n Industry control boards
CHP Series Ultra-High Power Chip Resistors
Electrical Characteristics
Characteristic
Power Rating @ 70 °C
Operating Temperature Range
Derated to Zero Load at
Maximum Working Voltage
1 ohm to 1 megohm
0.1 ohm to 0.91 ohm
Maximum Overload Voltage
1 ohm to 1 megohm
0.1 ohm to 0.91 ohm
Resistance Tolerance
Temperature Coefficient
1 ohm to 9.76 ohms
(±1 %, E24 & E96 Series)
10 ohms to 1 megohm
(±1 %, E24 & E96 Series)
1 ohm to 1 megohm
(±5 %, E24 Series
0.1 ohm to 0.91 ohm
(±1 %, E24 Series)
0.1 ohm to 0.91 ohm
(±5 %, E24 Series)
CHP0603
0.33 W
75 V
125 V
±200 ppm/°C
±100 ppm/°C
±200 ppm/°C
Model
CHP0805
CHP1206
0.5 W
0.75 W
-55 °C to +155 °C
+155 °C
200 V
250 V
300 V
±1 %, ±5 %
500 V
±150 ppm/°C***
±100 ppm/°C
±200 ppm/°C
±100 ppm/°C
±100 ppm/°C
±200 ppm/°C
CHP2512
3W
250 V
1652 mV
500 V
3695 mV
±100 ppm/°C
±100 ppm/°C
±200 ppm/°C
±100 ppm/°C
±200 ppm/°C
***TCR code assigned as “X” - see How to Order chart.
Note: Solder pad and trace size should be evaluated and board surface temperature should not exceed +105 °C when applying
full rated power.
For Standard Values Used in Capacitors, Inductors and Resistors, click here.
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
* RoHS Directive 2015/863, Mar 31, 2015 and Annex.
** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.



CHP0805
CHP Series Ultra-High Power Chip Resistors
Product Dimensions
Model
CHP0603
CHP0805
CHP1206
CHP2512
L W C D T
1.60 ± 0.10 0.80 ± 0.10 0.30 ± 0.20 0.30 ± 0.30 0.45 ± 0.10
(0.063 ± 0.004) (0.031 ± 0.004) (0.012 ± 0.008) (0.012 ± 0.008) (0.018 ± 0.004)
2.00 ± 0.10 1.25 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 0.50 ± 0.10
(0.079 ± 0.004) (0.049 ± 0.004) (0.016 ± 0.008) (0.016 ± 0.008) (0.020 ± 0.04)
3.10 ± 0.10 1.60 ± 0.10 0.50 ± 0.25 0.50 ± 0.25 0.55 ± 0.10
(0.122 ± 0.004) (0.063 ± 0.004) (0.020 ± 0.010) (0.020 ± 0.010) (0.022 ± 0.004)
6.40 ± 0.20 3.10 ± 0.20 0.45 ± 0.25 1.80 ± 0.25 0.60 ± 0.15
(0.252 ± 0.008) (0.122 ± 0.008) (0.018 ± 0.010) (0.071 ± 0.010) (0.024 ± 0.006)
D IMENSIONS:
MM
(INCHES)
Recommended Solder Pad Layout
Model
A
C HP0603 (00.0.9305 )
C HP0805 (01.0.3501 )
C HP1206 (01.0.8701 )
C HP2512 (03.1.7406 )
B
1.00
(0.039)
1.15
(0.045)
1.30
(0.051)
2.45
(0.096)
L
3.00
(0.118)
3.50
(0.138)
4.70
(0.185)
7.60
(0.299)
A
C
C
D
A
100
100
C
C
D
B
B
T
T
DD
L
L
A
A
B
D IMENSIONS:
MM
(INCHES)
B
Surge Performance
1000
100
10
1
0.1
0.0001
0.001
0.01
Pulse Duration (Seconds)
0.1
CHP2512
CHP1206
CHP0805
CHP0603
1
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.



CHP0805
3CH31P2Se-r2iems UmltrSa-MHiDghTProiwmemr Cihnigp RPeostiestnortsiometer
Construction
Sn PLATING
OVERCOAT
(BLACK)
CONDUCTOR
RESISTIVE
ELEMENT
CERAMIC SUBSTRATE
Ni PLATING
Environmental Characteristics
Moisture Sensitivity Level.................................................. 1
ESD Classification (HBM)................................................. 1A
Derating Curve
100
Rated Voltage
The rated voltage is calculated by the following formula:
V= P X R
V: Rated Voltage (V)
P: Rated Power (W)
R: Resistance Value (W)
-55 70
155
Ambient Temperature (°C)
Soldering Profile
275
<1> Maximum of 20 seconds between
+255 °C and +260 °C
< 1 > 255 °C
225
175
150 °C
220 °C
190 °C
s9e0c o- n1d5s0
260 °C peak
Ramp Down
6 °C/second
125 60 - 120 seconds
10 seconds minimum
75
Ramp Up
3 °C/second maximum
25
0
50 100 150 200 250 300
Time (seconds)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.







@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)