CO602

Clipped-Sine & HCMOS OCXO www.DataSheet4U.com Oven Controlled Crystal Oscillator Low power consumption Excellent temperature stabilities High stability overtone crystal Fast warm-up CO602 Specifications: Frequency Range: Operating Temperature: 2.0 MHz or 150.0 MHz 0°C ~ +50°C -10°C ~ +45°C -10°C ~ +55°C -20°C ~ +60°C -30°C ~ +70°C Storage Temperature: Frequency Stability: Accuracy: Vs. Temperature: -40°C ~ +85°C ± 5 x 10-9 ± 5 x 10-7 ± 1 x 10-7 ± 5 x 10-8 ± 1 x 10-8 ± 5 x 10-9 ± 8 x 10-11 ± 1 x 10-9 ± 5 x 10-8 -A -B -C -D -E CO-C Short-Term Stability: Aging Rate: Output Waveform: Output Level: Phase Noise: - 57 - 17 - 58 - 18 - 59 per second per day per year max Clipped-Sine Wave, HCMOS 1.0 Vp-p min clipped-sine @ 1KΩ TTL, HCMOS compatible -100dBc/Hz -130sBc/Hz -140dBc/Hz -145dBc/Hz -25 dB +5.0 VDC (± 5%) +12.0 VDC (± 5%) -P All dimensions are in mm @ 10 Hz @ 100 Hz @ 1 KHz @ 10 KHz Pin 1 2 3 4 5 Configurations Vcc Vref Vc/Nc Ground Output Harmonics Distortion: Supply Voltage: Supply Current: 300mA max at warm-up 100mA max after warm-up at 25°C ±3.0 ppm tuning via ext potentiometer Frequency Adjust: Note: 1. 2. Ordering Information Product name + Temperature + Stability + Frequency + Other Specification Code. i.e. CO602C18-10.0MHz or CO602D58P-10.0MHz Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. Not all combinations of the above, stabilities, and temperature ranges are availa...