INTEGRATED CIRCUITS DIVISION
Features
• Isolates One Signal in Each Direction • Operates From 2.7V to 5.5V • Buffered In...
INTEGRATED CIRCUITS DIVISION
Features
Isolates One Signal in Each Direction Operates From 2.7V to 5.5V Buffered Inputs - No External LED Drive Required
Voltage Level Translation Hysteresis at Inputs for Noise Rejection Slew-Limited Drivers Reduce EMI Power-Down to Hi-Z Does Not Load Outputs 5Mbaud Data Rate 8-Pin DIP or Surface Mount Packages
Applications
Isolated Signal Monitoring and Control Power-Over-Ethernet Power Supply High-Side Interface Logic-Level Translation Microprocessor System Interface Inter-Integrated Circuit (I2C) Interface Serial Peripheral Interface (SPI) Full Duplex Communication Isolated Line Receiver Isolated Data Acquisition Systems
Approvals
UL Recognized Component: File E76270 EN/IEC 60950: Certificate B 12 11 82667 001
CPC5001
Dual, One Channel Each Direction Digital Optical Isolator
Description
The CPC5001 is a dual, non-inverting digital optical isolator with buffered-logic inputs and open-drain outputs. Channel 1 propagates a signal from Side A to Side B, while Channel 2 sends a signal from Side B to Side A. It provides galvanic isolation up to 3750Vrms. When the two sides are powered by supplies with different
voltages, it also functions as a logic level translator for supply
voltages as low as 2.7V or as high as 5.5V. Available in 8-pin DIP and surface mount packages, it functionally replaces two logic buffers and two single-channel optoisolators. Internal bandgap references regulate the LED drive curr...