www.DataSheet4U.com
µPD72103A
HDLC CONTROLLER
µPD72103A
©
1997
Document No. S10766EJ9V0UM00 (9th edition) Date Publ...
www.DataSheet4U.com
µPD72103A
HDLC CONTROLLER
µPD72103A
©
1997
Document No. S10766EJ9V0UM00 (9th edition) Date Published March 1997 N CP(N) Printed in Japan
www.DataSheet4U.com
NOTES FOR
CMOS DEVICES
1 PRECAUTION AGAINST ESD FOR SEMICONDUCTORS Note: Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred. Environmental control must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using insulators that easily build static electricity. Semiconductor devices must be stored and transported in an anti-static container, static shielding bag or conductive material. All test and measurement tools including work bench and floor should be grounded. The operator should be grounded using wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need to be taken for PW boards with semiconductor devices on it. 2 HANDLING OF UNUSED INPUT PINS FOR
CMOS Note: No connection for
CMOS device inputs can be cause of malfunction. If no connection is provided to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence causing malfunction.
CMOS devices behave differently than Bipolar or NMOS devices. Input levels of
CMOS devices must be fixed high or low by using a pull...