Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
DAC101S101, DAC101S101-Q1
SNAS...
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
DAC101S101, DAC101S101-Q1
SNAS321G – JUNE 2005 – REVISED APRIL 2016
DAC101S101 and DAC101S101Q-1 10-Bit Micro Power, RRO Digital-to-Analog Converter
1 Features
1 DAC101S101Q is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow.
Ensured Monotonicity Low Power Operation Rail-to-Rail
Voltage Output Power-on Reset to Zero Volts Output Wide Temperature Range of −40°C to +125°C Wide Power Supply Range of 2.7 V to 5.5 V Small Packages Power Down Feature Resolution 10 bits DNL +0.15, –0.05 LSB (typical) Output Settling Time 8 μs (typical) Zero Code Error 3.3 mV (typical) Full-Scale Error −0.06 %FS (typical) Power Consumption
– Normal Mode, 0.63 mW (3.6 V) / 1.41 mW (5.5 V) typical
– Power Down Mode, 0.14 μW (3.6 V) / 0.33 μW (5.5 V) typical
2 Applications
Battery-Powered Instruments Digital Gain and Offset Adjustment Programmable
Voltage & Current Sources Programmable Attenuators Automotive
3 Description
The DAC101S101 is a full-featured, general purpose 10-bit
voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7 V to 5.5 V supply and consumes just 175 µA of current at 3.6 Volts. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply
voltage range and is compatible with standard SPI, QSPI, MICRO...