DEI1016C

www.DataSheet4U.com Device Engineering Incorporated 385 East Alamo Drive Chandler, AZ 85225 Phone: (480) 303-0822 Fax: (480) 303-0824 E-mail: [email protected] DEI1016/DEI1016A/DEI1016B /DEI1016C ARINC 429 Transceiver Family Features Two Receivers and One Transmitter Industry Standard Pin for Pin Replacement Part Wraparound Self-Test mode Word length can be configured for 25 bit or 32 bits operation Parity Status and generation of Receive and Transmit Words 8 Word Transmitter buffer Low Power CMOS processing Supports multiple ARINC protocols: 429, 571, 575, 706 Available in extended (-55/+85°C) and Military (-55/+125°C) temperature ranges General Description: The DEI1016 provides an interface between a standard avionics type serial digital data bus and a 16-bit-wide digital data bus. The interface circuit consists of a single channel transmitter with an 8X32 bit buffer, two independent receive channels, and a host programmable control register to select operating options. The two receiver channels operate identically, each providing a direct electrical interface to an ARINC data bus. The transmitter circuit contains an 8 word by 32 bit buffer memory and control logic which allows the host to write a block of data into the transmitter. The block of data is transmitted automatically by enabling the transmitter with no further attention by the host computer. Data is transmitted in TTL format on the D0(A)/D0(B) output pins. The signal format is compatible wit...