TIGER ELECTRONIC CO.,LTD
DF0 05S THRU DF1 0S
Single Phase 1.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range ...
TIGER ELECTRONIC CO.,LTD
DF0 05S THRU DF1 0S
Single Phase 1.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts
Current 1.0 Amperes
Features
UL Recognized File # E-230084 Ideal for printed circuit board Reliable low cost construction technique
results in inexpensive product
High temperature soldering guaranteed:
260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension
Mechanical Data
Case: Molded plastic Lead: solder plated Polarity: As marked
DBS
-+
.060(1.53) .040(1.02)
.013(0.33) .003(0.076)
.255(6.5) .404(10.3) .245(6.2) .386(9.80)
~~
.205(5.2) .195(5.0)
.335(8.51) .320(8.13)
45°
.043(1.10) .028(0.70)
.130(3.30) .120(3.05)
.047(1.20) .040(1.02)
Dimensions in inches and (millimeters)
.013(0.33) .0088(0.22)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
DF 005S
Maximum Repetitive Peak Reverse
Voltage
VRRM
50
Maximum RMS
Voltage Maximum DC blocking
Voltage
VRMS VDC
35 50
DF 01 S
100
70
100
DF 02 S
200
140
200
Maximum Average Forward Rectified Current
@TA = 40℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward
Voltage @ 1.0A Maximum DC Reverse Current @ TA=25℃ rated DC blocking
voltage per leg TA = 125℃
Typical Thermal Resistance (Note)
...