±800 V DIN RAIL-MOUNTABLE VOLTAGE SENSORS
GENERAL DESCRIPTION
The ModuLink ±800 V isolated voltage sensors are easyto-u...
±800 V DIN RAIL-MOUNTABLE
VOLTAGE SENSORS
GENERAL DESCRIPTION
The ModuLink ±800 V isolated
voltage sensors are easyto-use devices, tailored for power electronics applications. When employed with imperix’s BoomBox control platform, the sensors provide plug&play connectivity and can be directly powered by the control platform.
The devices produce a balanced full-differential output signal, proportional to the sensed
voltage. For best EMC performance, the output signal is typically meant to be carried by a shielded twisted pair embedded in RJ45-type cables.
Modulink sensors can be easily clipped on 35mm DIN rails and are compatible with up to 6 mm2 wires. They guarantee the galvanic isolation of the sensing circuit up to 1 kVRMS
KEY FEATURES AND SPECIFICATIONS
–– ±800 V measuring range –– Minimum 60 kHz measurement bandwidth –– Balanced full-differential signal output –– Typical sensitivity of 2.46 mV/V –– 1.2 kVPK galvanic isolation (permanent) –– ±0.15 % typical precision –– Compatible with standard ±15 V power supplies –– Mountable on 35 mm DIN rails
V+ 8x 1MΩ
0.1%
2K7
0.1%
V-
ISO5V
1
power supplies, 2
lters
3
3V3 4
VCC VCC GND
VO+
470pF
GND
5 VO-
6 GND 7 VEE 8 VEE
BOOMBOX CONFIGURATION
The recommended configuration for the BoomBox is shown in Table 1 :
Sensitivity 2.46 mV/V
Filter
Gain
Filter = NONE G= 4
Input High-impedance
Table 1. Suggested configuration of the BoomBox
Imperix recommends to consider calibrating each sensor for improved accuracy. When d...