DLP3034-Q1

Product Folder Order Now Technical Documents Tools & Software Support & Community DLP3034-Q1 DLPS176A – APRIL 2019 – REVISED SEPTEMBER 2019 DLP3034-Q1 0.3-Inch WVGA 405-nm DMD for Automotive Display 1 Features 1 Automotive qualified – –40°C to 105°C operating temperature range for DMD array Supports 405-nm illumination sources 0.3-inch diagonal micromirror array – 7.6-µm micromirror pitch – ±12° micromirror tilt angle (relative to flat state) – Side illumination for optimized efficiency WVGA (864 × 480) resolution Polarization independent spatial light modulator – Compatible with LED or laser light sources Low-power consumption: 105-mW (typical) Operating temperature range: –40°C to 105°C Hermetic package with 2.5°C/W thermal efficiency JTAG boundary scan to allow in-system validation Compatible with the DLPC120-Q1 automotive DMD controller 78-MHz DDR DMD interface 2 Applications Transparent window display for front, side, and rear vehicle windows 3 Description The DLP3034-Q1 automotive DMD is primarily targeted for transparent window display applications. This chipset can be coupled with 405-nm illumination sources (e.g. LEDs or lasers) in an optical projection system to project onto windows embedded with emissive phosphor films. When these transparent emissive films are excited with 405-nm light from a DLP3034-Q1 projector, the window becomes a display emitting light in the visible spectrum. In addition, this chipset enables high power optical...