Applications Processor. DRA710 Datasheet

DRA710 Datasheet PDF


Part Number

DRA710

Description

Infotainment Applications Processor

Manufacture

etcTI

Total Page 30 Pages
Datasheet
Download DRA710 Datasheet



DRA710
Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
DRA710, DRA712
DRA714, DRA716, DRA718
SPRS960F – JUNE 2016 – REVISED MAY 2019
DRA71x Infotainment Applications Processor
1 Device Overview
1.1 Features
1
• Architecture designed for infotainment applications
• Video, image, and graphics processing support
– Full-HD video (1920 × 1080p, 60 fps)
– Multiple video input and video output
– 2D and 3D graphics
• Arm® Cortex®-A15 microprocessor subsystem
• C66x floating-point VLIW DSP
– Fully object-code compatible with C67x and
C64x+
– Up to thirty-two 16 × 16-bit fixed-point multiplies
per cycle
• Up to 512KB of on-chip L3 RAM
• Level 3 (L3) and Level 4 (L4) interconnects
• DDR3/DDR3L Memory Interface (EMIF) module
– Supports up to DDR-1333 (667 MHz)
– Up to 2GB across single chip select
• Dual Arm® Cortex®-M4 Image Processing Units
(IPU)
• IVA-HD subsystem
• Display subsystem
– Display controller With DMA engine and up to
three pipelines
– HDMI™ encoder: HDMI 1.4a and DVI 1.0
compliant
• 2D-graphics accelerator (BB2D) subsystem
– Vivante® GC320 core
• Video Processing Engine (VPE)
• Single-core PowerVR™ SGX544 3D GPU
• One Video Input Port (VIP) module
– Support for up to four multiplexed input ports
• General-Purpose Memory Controller (GPMC)
• Enhanced Direct Memory Access (EDMA)
controller
• 2-port gigabit ethernet (GMAC)
– Up to two external ports
• Sixteen 32-bit general-purpose timers
• 32-Bit MPU watchdog timer
• Six high-speed inter-integrated circuit (I2C) ports
• HDQ™/ 1-Wire® interface
• Ten configurable UART/IrDA/CIR modules
• Four Multichannel Serial Peripheral Interfaces
(McSPI)
• Quad SPI Interface (QSPI)
• Media Local Bus Subsystem (MLBSS)
• Eight Multichannel Audio Serial Port (McASP)
modules
• SuperSpeed USB 3.0 dual-role device
• High-speed USB 2.0 dual-role device
• High-speed USB 2.0 on-the-go
• Four MultiMedia Card/Secure Digital/Secure Digital
Input Output Interfaces ( MMC™/ SD®/SDIO)
• PCI Express® 3.0 subsystems with two 5-Gbps
lanes
– One 2-lane Gen2-compliant port
– or two 1-lane Gen2-compliant ports
• Dual Controller Area Network (DCAN) modules
– CAN 2.0B protocol
• MIPI® CSI-2 camera serial interface
• Up to 186 General-Purpose I/O (GPIO) pins
• Device security features
– Hardware crypto accelerators and DMA
– Firewalls
– JTAG lock
– Secure keys
– Secure ROM and boot
– Customer programmable keys
• Power, reset, and clock management
• On-chip debug with CTools technology
• 28-nm CMOS technology
• 17 mm × 17 mm, 0.65-mm pitch, 538-pin BGA
(CBD)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.

DRA710
DRA710, DRA712
DRA714, DRA716, DRA718
SPRS960F – JUNE 2016 – REVISED MAY 2019
www.ti.com
1.2 Applications
• Human-machine interface (HMI)
• Navigation
• Digital and analog radio
• Multimedia playback
• Automotive display audio systems
• Automotive entry navigation and multimedia
systems
• Automotive digital cluster systems
1.3 Description
The DRA71x processor is offered in a 538-ball, 17×17-mm, 0.65-mm ball pitch (0.8mm spacing rules can
be used on signals) with Via Channel™ Array (VCA) technology, ball grid array (BGA) package.
The architecture is designed to deliver high-performance concurrencies for automotive applications in a
cost-effective solution, providing full scalability from the DRA75x ("Jacinto 6 EP" and "Jacinto 6 Ex"),
DRA74x "Jacinto 6" and DRA72x "Jacinto 6 Eco" family of infotainment processors, including graphics,
voice, HMI, multimedia and smartphone projection mode capabilities.
Programmability is provided by a single-core Arm Cortex-A15 RISC CPU with Arm Neon™ extensions and
a TI C66x VLIW floating-point DSP core. The Arm processor lets developers keep control functions
separate from other algorithms programmed on the DSP and coprocessors, thus reducing the complexity
of the system software.
Additionally, TI provides a complete set of development tools for the Arm, and DSP, including C compilers
and a debugging interface for visibility into source code execution.
Cryptographic acceleration is available in all devices. All other supported security features, including
support for secure boot, debug security and support for trusted execution environment are available on
High-Security (HS) devices. For more information about HS devices, contact your TI representative.
The DRA71x Jacinto 6 Entry processor family is qualified according to the AEC-Q100 standard.
The device features a simplified power supply rail mapping which enables lower cost PMIC solutions.
PART NUMBER
Device Information(1)
PACKAGE
DRA710CBD
FCBGA (538)
DRA712CBD
FCBGA (538)
DRA714CBD
FCBGA (538)
DRA716CBD
FCBGA (538)
DRA718CBD
FCBGA (538)
(1) For more information, see Section 9, Mechanical, Packaging, and Orderable Information.
BODY SIZE
17.0 mm × 17.0 mm
17.0 mm × 17.0 mm
17.0 mm × 17.0 mm
17.0 mm × 17.0 mm
17.0 mm × 17.0 mm
2 Device Overview
Copyright © 2016–2019, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: DRA710 DRA712 DRA714 DRA716 DRA718




@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)