DRF1300

DRF1300(G) MOSFET Push-Pull Hybrid D The DRF1300 is a push-pull hybrid containing two high power gate IN drivers and two power MOSFETs. It was designed to provide the sys- S tem designer increased flexibility, higher performance, and lowered cost D over a non-integrated solution. This low parasitic approach, coupled with the Schmitt trigger input, Kelvin signal ground, Anti-Ring function IN Invert and Non-invert select pin provide improved stability and control in DRIVER 30A S MOSFETS Kilowatt to Multi-Kilowatt, High Frequency ISM applications. 500V, 30A, 30MHz FEATURES Switching Frequency: DC TO 30MHz Inverting Non-Inverting Select Low Pulse Width Distortion Single Power Supply (Per Section) 1V CMOS Schmitt Trigger Input 1V Hysteresis Switching Speed 3-4ns BVds = 500V Ids = 30A max. Per-section Rds(on) ≤ .24 Ohm PD = 550W Per-section RoHS Compliant TYPICAL APPLICATIONS Class C, D and E RF Generators Switch Mode Power Amplifiers HV Pulse Generators Ultrasound Transducer Drivers Acoustic Optical Modulators Driver Absolute Maximum Ratings Symbol VDD IN, FN IO PK TJMAX Parameter Supply Voltage Input Single Voltages Output Current Peak Operating Temperature Driver Specifications Symbol VDD IN Parameter Supply Voltage Input Voltage IN(R) IN(F) IDDQ IO Ciss RIN VT(ON) VT(OFF) TDLY tr tf Input Voltage Rising Edge Input Voltage Falling Edge Quiescent Current Output Current Input Capacitance Input Parallel Resistance Input, Low to ...