Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
DRV8835
SLVSB18H – MARCH 2012 ...
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
DRV8835
SLVSB18H – MARCH 2012 – REVISED AUGUST 2016
DRV8835 Dual Low-
Voltage H-Bridge IC
1 Features
1 Dual-H-Bridge Motor Driver – Capable of Driving Two DC Motors or One Stepper Motor – Low-
MOSFET ON-Resistance: HS + LS 305 mΩ
1.5-A Maximum Drive Current Per H-Bridge Configure Bridges Parallel for 3-A Drive Current Separate Motor and Logic-Supply Pins:
– 0-V to 11-V Motor-Operating Supply-
Voltage – 2-V to 7-V Logic Supply-
Voltage Separate Logic and Motor Power Supply Pins Flexible PWM or PHASE/ENABLE Interface Low-Power Sleep Mode With 95-nA Maximum Supply Current Tiny 2.00-mm × 3.00-mm WSON Package
2 Applications
Battery-Powered: – Cameras – DSLR Lenses – Consumer Products – Toys – Robotics – Medical Devices
3 Description
The DRV8835 provides an integrated motor driver solution for cameras, consumer products, toys, and other low-
voltage or battery-powered motion control applications. The device has two H-bridge drivers, and drives two DC motors or one stepper motor, as well as other devices like solenoids. The output driver block for each consists of N-channel power
MOSFETs configured as an H-bridge to drive the motor winding. An internal charge pump generates gate drive
voltages.
The DRV8835 supplies up to 1.5-A of output current per H-bridge and operates on a motor power supply
voltage from 0 V to 11 V, and a device power supply
voltage of 2 V to 7 V.
PHASE/ENABLE ...