www.ti.com
SLVSBA4F – JUNE 201DD2 –RRRVVE88V88IS33E77D,, DDAPRRRVVIL882880332881
SLVSBA4F – JUNE 2012 – REVISED APRIL 2...
www.ti.com
SLVSBA4F – JUNE 201DD2 –RRRVVE88V88IS33E77D,, DDAPRRRVVIL882880332881
SLVSBA4F – JUNE 2012 – REVISED APRIL 2021
DRV883x Low-
Voltage H-Bridge Driver
1 Features
H-Bridge Motor Driver
– Drives a DC Motor or Other Loads – Low
MOSFET On-Resistance: HS + LS
280 mΩ 1.8-A Maximum Drive Current Separate Motor and Logic Supply Pins:
– Motor VM: 0 to 11 V – Logic VCC: 1.8 to 7 V PWM or PH-EN Interface
– DRV8837: PWM, IN1 and IN2 – DRV8838: PH and EN Low-Power Sleep Mode With 120-nA Maximum Sleep Current
– nSLEEP pin Small Package and Footprint
– 8-Pin WSON With Thermal Pad – 2.0 × 2.0 mm Protection Features
– VCC Under
voltage Lockout (UVLO) – Overcurrent Protection (OCP) – Thermal Shutdown (TSD)
2 Applications
Cameras DSLR Lenses Consumer Products Toys Robotics Medical Devices
3 Description
The DRV883x family of devices provides an integrated motor driver solution for cameras, consumer products, toys, and other low-
voltage or battery-powered motion control applications. The device can drive one dc motor or other devices like solenoids. The output driver block consists of Nchannel power
MOSFETs configured as an H-bridge to drive the motor winding. An internal charge pump generates needed gate drive
voltages.
The DRV883x family of devices can supply up to 1.8 A of output current. It operates on a motor power supply
voltage from 0 to 11 V, and a device power supply
voltage of 1.8 V to 7 V.
The DRV8837 device has a PWM (IN1-IN2) input interface; th...