Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
DRV8841
SLVSAC0F – MAY 2010 – ...
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
DRV8841
SLVSAC0F – MAY 2010 – REVISED DECEMBER 2015
DRV8841 Dual H-Bridge Driver IC
1 Features
1 Dual H-Bridge DC Motor Driver – Single and Dual Brushed DC – Stepper
PWM Control Interface Optional Fixed Frequency Current Regulation
– Two Bit Current Control Allows Up to Four Current Levels
Low
MOSFET On-Resistance – 2.5-A Maximum Drive Current at 24 V and TA = 25°C – Combined 400 mΩ RDS(ON) of High-Side and Low-Side at 24 V and TA = 25°C
8.2-V to 45-V Operating Supply
Voltage Range Low Current Sleep Mode Built-In 3.3-V Reference Output Thermally Enhanced Surface Mount Package Protection Features
– Overcurrent Protection (OCP) – Thermal Shutdown (TSD) – Under
voltage Lockout (UVLO) – Fault Condition Indication Pin (nFAULT)
2 Applications
Printers
Scanners
Office Automation Machines
Gaming Machines
Factory Automation
Robotics
3 Description
The DRV8841 provides an integrated dual H-bridge motor driver solution for printers, scanners, and other automated equipment applications. The device can be used to drive one or two brushed DC motors, a bipolar stepper motor, or other loads. A simple PWM interface allows easy interfacing to controller circuits.
The output driver block consists of N-channel power
MOSFETs configured as H-bridges. The DRV8841 an supply up to 2.5-A peak or 1.75-A RMS output current (with proper heat sinking at 24 V and TA = 25°C) per H-bridge.
A...