Elapsed Time Counter
www. maxim-i c.com
DS1602 Elapsed Time Counter
www.maxim-ic.com
FEATURES
§ Two 32-bit counters keep track of real-tim...
Description
www. maxim-i c.com
DS1602 Elapsed Time Counter
www.maxim-ic.com
FEATURES
§ Two 32-bit counters keep track of real-time
and elapsed time § Counters keep track of seconds for over 125
PIN ASSIGNMENT
RST 1 DQ 2
8 VCC 7 X1
years § Battery powered counter counts seconds from
the time battery is attached until VBAT is less
than 2.5V § VCC powered counter counts seconds while
VCC is above VTP and retains the count in the
absence of VCC under battery backup power § Clear function resets selected counter to 0 § Read/write serial port affords low pin count § Maximum current drain of less than 1 µA
from VBAT pin when serial port is disabled § One byte protocol defines read/write, counter
address and software clear function § 8-pin DIP or optional 8-pin SOIC § Operating temperature range of -40°C to
+85°C § Reduced performance operation down to
VCC = 2.5V § Underwriters Laboratory (UL) recognized
CLK GND
3 4
6 X2 5 VBAT
DS1602 8-Pin DIP (300mil)
RST 1 DQ 2
8 VCC 7 X1
CLK 3 6 X2
GND 4
5 VBAT
DS1602
8-Pin SOIC (208mil)
Package Dimension Information
www.maxim-ic.com/TechSupport/DallasPackInfo.htm
PIN DESCRIPTION
RST
CLK
- Reset - Clock
DQ - Data Input/Output
GND
- Ground
X1, X2
- Crystal Inputs
DESCRIPTION
VBAT VCC
- + Battery Input - +5V
The DS1602 is a real-time clock/elapsed time counter designed to count seconds when VCC power is
applied and continually count seconds under battery backup power with an additional counter regardless
of the condition of VCC...
Similar Datasheet