DatasheetsPDF.com

DS91D176 Datasheet

Part Number DS91D176
Manufacturers National Semiconductor
Logo National Semiconductor
Description Multipoint-LVDS (M-LVDS) Transceivers
Datasheet DS91D176 DatasheetDS91D176 Datasheet (PDF)

DS91D176/DS91C176 Multipoint-LVDS (M-LVDS) Transceivers February 2007 DS91D176/DS91C176 Multipoint-LVDS (M-LVDS) Transceivers General Description The DS91C176 and DS91D176 are high-speed M-LVDS differential transceivers designed for multipoint applications with multiple drivers or receivers. Multipoint LVDS (M-LVDS) is a new bus interface standard (TIA/EIA-899) based on LVDS but including several enhancements to improve multipoint performance. M-LVDS devices have superior drive capability and .

  DS91D176   DS91D176






Part Number DS91D176
Manufacturers Texas Instruments
Logo Texas Instruments
Description 100 MHz Single Channel M-LVDS Transceiver
Datasheet DS91D176 DatasheetDS91D176 Datasheet (PDF)

DS91C176, DS91D176 www.ti.com SNLS146L – MARCH 2006 – REVISED APRIL 2013 DS91D176/DS91C176 100 MHz Single Channel M-LVDS Transceivers Check for Samples: DS91C176, DS91D176 FEATURES 1 •2 DC to 100+ MHz / 200+ Mbps Low Power, Low EMI Operation • Optimal for ATCA, uTCA Clock Distribution Networks • Meets or Exceeds TIA/EIA-899 M-LVDS Standard • Wide Input Common Mode Voltage for Increased Noise Immunity • DS91D176 has Type 1 Receiver Input • DS91C176 has Type 2 Receiver with Fail-safe • Industr.

  DS91D176   DS91D176







Multipoint-LVDS (M-LVDS) Transceivers

DS91D176/DS91C176 Multipoint-LVDS (M-LVDS) Transceivers February 2007 DS91D176/DS91C176 Multipoint-LVDS (M-LVDS) Transceivers General Description The DS91C176 and DS91D176 are high-speed M-LVDS differential transceivers designed for multipoint applications with multiple drivers or receivers. Multipoint LVDS (M-LVDS) is a new bus interface standard (TIA/EIA-899) based on LVDS but including several enhancements to improve multipoint performance. M-LVDS devices have superior drive capability and can support up to 32 loads. Along with increased drive, M-LVDS devices are required to have a controlled edge rate to minimize reflections and EMI. The 1 nSec minimum edge rate is tolerant of stub lengths up to 2 inches in length. MLVDS devices also have a very large common mode range for additional noise margin in heavily loaded and noisy backplane environments. The DS91C176/DS91D176 are half-duplex transceivers that accept LVTTL/LVCMOS signals at the driver inputs and convert them to differential M-LVDS signal levels. The receiver inputs accept low voltage differential signals (LVDS, B-LVDS, M-LVDS, LV-PECL) and convert them to 3V LVCMOS signals. The DS91D176 has a M-LVDS type 1 receiver input with no offset. The DS91C176 receiver contains an M-LVDS type 2 failsafe circuit with an internal 100 mV offset that provides a LOW output for both short and open input conditions. Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Meets TIA/EIA-899 M-LVDS Standard Capable of driving 32 LVDS loads Controlled Edge R.


2007-06-01 : GNR20D181K    GNRxxDxxxK    AM7905A    LT1789-1    LT1789-10    FEM-10    FEM10    ADC083000    GRM42-6X7R104K050AD    GRM36-xX7R   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)