DTS-xx

DIODE TRANSFER SWITCHES 0.025 - 18 GHz GENERAL INFORMATION Series DTS transfer switches allow power entering two input ports, A and B, to exit from output ports C and D respectively, or by appropriate switching, to exit from ports D and C respectively. A functional schematic of a transfer is shown in Fig. 1, and a typical circuit is shown in Fig. 2. SERIES DTS www.DataSheet4U.com GENERAL SPECIFICATIONS Frequency Coverage: RF Impedance: DC Requirements: 0.025 to 18.0 GHz. 50 OHMS. For all units with driver Logic “0” = Ins. Loss A→C, B→D Isol. A→D, B→C Logic “1” = Ins. Loss A→D, B→C Isol. A→C, B→D Operating temperature from –55°C to +85°C. 10% to 90% or 90% to 10% of RF. There is an additional 20 nanosec of driver delay. 1 ␮sec SMA Temperature Information: Switching Speed: Typical: Connectors: ELECTRICAL PERFORMANCE Frequency Ins Model Range Loss dB No. GHz Maximum DTS-12 0.025-0.25 0.75 DTS-18 0.10-0.50 1.0 DTS-27 0.5-1.0 0.8 DTS-29 0.5-2.0 1.0 DTS-33 1.0-2.0 1.0 DTS-45 1.7-2.4 1.2 DTS-48 2.0-4.0 1.5 DTS-58 4.0-8.0 1.8 DTS-75 6.0-18.0 3.2 VSWR Maximum 1.6 1.5 1.5 1.5 1.5 1.5 1.5 1.6 2.0 Isolation dB Minimum 60 60 60 60 60 50 50 40 30 Maximum Power Handling Ability Watts PK Watts Avg. 5 1.0 5 1.0 2 0.5 5 1.0 2 0.5 5 1.0 2 0.5 5 1.0 2 0.5 KEY: Inches[Millimeters] .XX ±.03 .XXX ±.010 [.X ±0.8 .XX ±0.25] 10/98 An MCE Company CORPORATION TRIANGLE 60 South Jefferson Road, Whippany, NJ 07981 Tel: 973-887-8100 Fax: 973-884-0445 E-Mail: kdisales@aol.com See us on the web...