FA7700V, FA7701V
s Description
FA7700V/FA7701V are the PWM type DC to DC converter control ICs with 1ch output that can ...
FA7700V, FA7701V
s Description
FA7700V/FA7701V are the PWM type DC to DC converter control ICs with 1ch output that can directly drive power
MOSFETs.
CMOS devices with high breakdown
voltage are used in these ICs and low power consumption is achieved. These ICs have not only the functions equivalent to those of FA76XX series but also the functions of directly driving Nch/Pch
MOSFETs, lower power consumption, higher frequency operation, and less external components.
CMOS IC For Switching Power Supply Control FA7700V, FA7701V
s Dimensions, mm TSSOP-8
4.4 ±0.2
6.4 ±0.3
s Features
Wide range of supply
voltage: VCC=2.5 to 20V FA7700V: For boost, flyback converter (Maximum output duty cycle is 80%) FA7701V: For buck converter (Maximum output duty cycle is 100%) Output stage consist of
CMOS push-pull circuit, and achieves a high speed switching of external
MOSFETs. (FA7700V: For Nch-
MOSFET driving, FA7701V: For Pch-
MOSFET driving) High accuracy reference
voltage (Error amplifier): 0.88V±2% Soft start function Adjustable built-in timer latch for short-circuit protection Output ON/OFF control function Less external discrete components needed (2 components less than conventional version of the equivalent products) Low power consumption Stand-by current: 40µA typ. Operating current: 1.2mA typ. (Including error amplifier output current and oscillator current) High frequency operation: 50kHz to 1MHz Package: TSSOP-8, thin and small
0.575 typ
1.30 max
3.1
±0....