FAN302HLMY_F117 — mWSaver™ PWM Controller for Low Standby Power Battery-Charger Applications
January 2013
FAN302HLMY_F...
FAN302HLMY_F117 — mWSaver™ PWM Controller for Low Standby Power Battery-Charger Applications
January 2013
FAN302HLMY_F117 PWM Controller for Low Standby Power BatteryCharger Applications — mWSaver™ Technology
Features
mWSaver™ Technology Provides Industry’s
Best-in-Class Standby Power
- Ultra Low Power Consumption at No Load
(<10 mW at 230 VAC)
- Proprietary 500V High-
Voltage JFET Startup
Reduces Startup Resistor Loss
- Low Operation Current in Burst Mode:
350 µA Maximum
Constant-Current (CC) Control without Secondary-
Feedback Circuitry
Fixed PWM Frequency at 85kHz with Frequency
Hopping to Reduce EMI
High-
Voltage Startup Low Operating Current: 3.5 mA Peak-Current-Mode Control with Slope
Compensation
Cycle-by-Cycle Current Limiting VDD Over-
Voltage Protection (Auto-Restart) VS Over-
Voltage Protection (Latch Mode) VDD Under-
Voltage Lockout (UVLO) Gate Output Maximum
Voltage Clamped at 15 V Fixed Over-Temperature Protection (Latch Mode) Available in an 8-Lead SOIC Package
Applications
Battery Chargers for Cellular Phones, Cordless
Phones, PDAs, Digital Cameras, and Power Tools
Replaces Linear Regulators and RCC SMPS
Description
The FAN302HLMY_F117 advanced PWM controller significantly simplifies isolated power supply design that requires CC regulation of the output. The output current is precisely estimated with information in the primary side of the transformer and controlled with an internal compensation circuit. This removes the output curr...