FAN3181
Single 2A High-Speed, Low-Side IGBT Driver
The FAN3181 is suitable for designed to stand-alone IGBT driver in lo...
FAN3181
Single 2A High-Speed, Low-Side IGBT Driver
The FAN3181 is suitable for designed to stand-alone IGBT driver in lowside switching applications by providing high peak current pulses during the switching intervals. The protection functions include Under-
Voltage Lockout (UVLO) and Over-Current Protection (OCP), and Desaturation Protection (DESAT) with fault-out function and active miller clamp function. An open-drain fault-out signal is provided to indicate that an over-current, under-
voltage, and Desaturation detect has occurred. Soft turn-off feature is used to increase the reliability of an application during short-circuit or over-current periods. This feature works after the desaturation or over-current protection is activated, which provides protection for IGBT against short-circuit and over-current events. With the “Soft” turn-off feature, the gate
voltage will be reduced slowly in order to reduce IGBT current.
Features
Operating Supply
Voltage 25 V Typically 1.5 A/2.0 A Sourcing/Sinking Current-Driving Capability
at VCC = 15 V
Output In- Phase with Input Signal Active Miller Clamp Desaturation Protection Cycle-by-Cycle Edge-Triggered Shutdown Function Fault-Out and Shutdown Function Built-in VCC UVLO Function Built-in Soft Turn-Off Function Built-in Over-Current Protection (OCP) Operating Junction Temperature Range of -40°C to 125°C
Typical Applications
Switch-Mode Power Supplies DC – DC Converters Motor Control for PFC in Air-conditioner...