FAN6747 — Highly Integrated Green-Mode PWM Controller
September 2010
FAN6747 Highly Integrated Green-Mode PWM Controll...
FAN6747 — Highly Integrated Green-Mode PWM Controller
September 2010
FAN6747 Highly Integrated Green-Mode PWM Controller
Features
High-
Voltage Startup AC-Line Brownout Protection by HV Pin Constant Output Power Limit by HV Pin (Full AC-Line Range) Built-in 8ms Soft-Start Function Two-Level Over-Current Protection (OCP) with 220ms Debounce Short-Circuit Protection (SCP) with 15ms Debounce as Output Short Peak-Current Mode Operation with Cycle-by-Cycle Current Limiting Low Startup Current: 30µA Low Operating Current: 1.7mA Over-Temperature Protection (OTP) with an External Negative-Temperature-Coefficient (NTC) Thermistor PWM Frequency Decreasing at Green-Mode VDD Over-
Voltage Protection (OVP) Internal Latch Circuit for OVP, OTP, SCP, and OCP
Description
The highly integrated FAN6747 PWM controller provides several features to enhance the performance of flyback converters. To minimize standby power consumption, a proprietary green-mode function provides off-time modulation to decrease the switching frequency with load condition. Under zero-load condition, the power supply enters burst mode and burst frequency can be low to save more power. Green-mode function enables the power supply to meet international power conservation requirements. The FAN6747 is especially designed for SMPS with peak-current output. It incorporates a cycle-by-cycle current limiting and two-level Over-Current-Protection (OCP) that can handle peak load with a debounce time. Onc...