FNA41560T2

FNA41560T2 Motion SPM 45 ® Series August 2017 FNA41560T2 Motion SPM® 45 Series Features UL Certified No. E209204 (UL1557) 600 V - 15 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection Low Thermal Resistance Using Ceramic Substrate Low-Loss, Short-Circuit Rated IGBTs Built-In Bootstrap Diodes and Dedicated Vs Pins Sim- plify PCB Layout Built-In NTC Thermistor for Temperature Monitoring Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing Single-Grounded Power Supply Isolation Rating: 2000 Vrms / min. General Description FNA41560T2 is a Motion SPM® 45 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms. Applications Motion Control - Home Appliance / Industrial Motor Related Resources AN-9084 - Smart Power Module, Motion SPM® 45 H V3 Series User’s Guilde A...