FSA1211 — Low-Power, Twelve-Port, High-Speed Isolation Switch
www.DataSheet4U.com
June 2009
FSA1211 — Low-Power, Twel...
FSA1211 — Low-Power, Twelve-Port, High-Speed Isolation Switch
www.DataSheet4U.com
June 2009
FSA1211 — Low-Power, Twelve-Port, High-Speed Isolation Switch
Features
Low COFF Capacitance: 2.0pF Typical Low On Resistance: 7.5Ω Typical Low Power Consumption: 1μA Maximum 10μA Maximum ICCT over an Expanded
Voltage Range (VIN=2.6V, VCC=4.3V) Wide -3db Bandwidth: > 720MHz Packaged in Space-Saving 28-Lead UMLP 5.5kV ESD Rating; >9kV Power/GND ESD Rating Low On Capacitance: 6pF Typical
Description
The FSA1211 is a low-power, twelve-port, high-speed switch. This part is configured as a single-pole, singlethrow switch (SPST) and is optimized for isolating a high-speed source, such as a cell phone camera interface. The FSA1211 features an extremely low on capacitance (CON) of 6pF. The wide bandwidth (>720MHz) exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel-to-channel crosstalk minimizes interference. The FSA1211 contains special circuitry on pins A and B that allows the device to withstand an over-
voltage condition. This device is designed to minimize current consumption even when the control
voltage applied to the /OE pin is lower than the supply
voltage (VCC). This feature is especially valuable for mobile applications, such as cell phones, allowing direct interface with the general-purpose I/Os of the baseband processor. Other applications include port isolation and switching in po...