FSA3157B — Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-Multiplexer Bus Switch
December 2013
FSA3157B Low-Vo...
FSA3157B — Low-
Voltage SPDT Analog Switch or 2:1 Multiplexer / De-Multiplexer Bus Switch
December 2013
FSA3157B Low-
Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch
Features
Useful in Both Analog and Digital Applications Ultra-Small, MicroPak™ Leadless Package Low On Resistance: <10 Ω Typical at 3.3 V VCC Broad VCC Operating Range: 1.65 V to 5.5 V Rail-to-Rail Signal Handling Power-Down, High-Impedance Control Input Over-
Voltage Tolerance of Control Input to 7.0 V Break-Before-Make Enable Circuitry 250 MHz, 3 dB Bandwidth
Description
The FSA3157B is a high-performance, Single-Pole / Double-Throw (SPDT) analog switch or 2:1 multiplexer / de-multiplexer bus switch.
The device is fabricated with advanced sub-micron
CMOS technology to achieve high-speed enable and disable times and low on resistance. The break-beforemake select circuitry prevents disruption of signals on the B Port due to both switches temporarily being enabled during select pin switching. The device is specified to operate over the 1.65 to 5.5 V VCC operating range. The control input tolerates
voltages up to 5.5 V, independent of the VCC operating range.
Ordering Information
Part Number FSA3157BL6X FSA3157BFHX
Operating Temperature
Range
-40 to +85°C
-40 to +85°C
Top Mark
Package
Packing Method
7G 6-Lead, MicroPak™ 1.0 mm Wide Package
5000 Units on Tape and Reel
7G
6-Lead, MicroPak2™, 1x1 mm Body, .35 mm Pitch
5000 Units on Tape and Reel
© 2007 Fairchild...