Dual High Speed USB to Multipurpose UART/FIFO
FT2232H Dual High Speed USB to Multipurpose UART/FIFO IC Datasheet Version 2.6
Document No.: FT_000061 Clearance No.: FT...
Description
FT2232H Dual High Speed USB to Multipurpose UART/FIFO IC Datasheet Version 2.6
Document No.: FT_000061 Clearance No.: FTDI#77
Future Technology Devices International Ltd
FT2232H Dual High Speed USB to Multipurpose UART/FIFO IC
The FT2232H is FTDI’s 5th generation of USB devices. The FT2232H is a USB 2.0 High Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces. The FT2232H has the following advanced features:
Single chip USB to dual serial / parallel ports with a variety of configurations.
Entire USB protocol handled on the chip. No USB specific firmware programming required.
USB 2.0 High Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
Dual Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI or bit-bang) design.
Dual independent UART or FIFO or MPSSE ports.
Independent Baud rate generators. RS232/RS422/RS485 UART Transfer Data Rate
up to 12Mbaud. (RS232 Data Rate limited by external level shifter). USB to parallel FIFO transfer data rate up to 8 Mbyte/Sec. Single channel synchronous FIFO mode for transfers upto 40 Mbytes/Sec CPU-style FIFO interface mode simplifies CPU interface design. MCU host bus emulation mode configuration option. Fast Opto-Isolated serial interface option. FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driv...
Similar Datasheet