High Speed USB Bridge
FT233HP/FT232HP Datasheet Version 1.0
Document No.: FT_001484 Clearance No.: FTDI#558
Future Technology Devices Interna...
Description
FT233HP/FT232HP Datasheet Version 1.0
Document No.: FT_001484 Clearance No.: FTDI#558
Future Technology Devices International
Ltd
FT233HP/FT232HP
(High Speed USB Bridge with Type-C/PD3.0 Controller)
The FT233HP/FT232HP is a Hi-Speed USB
device with Type-C/PD 3.0 controller IC that
fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for
power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 1 independent channel
compatible with the FT232H – Single Hi-speed
USB to multipurpose UART/FIFO solution. The
FT233HP/FT232HP has the following advanced
features:
Supports PD Specification 3.0.
2 USB PD 3.0 Port Support. Port 1 supports Dual Role Swap Function while Port 2 supports sink
mode with charging function through to Port 1 (FT233HPQ and FT233HPL only).
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.
Type-C/PD Physical Layer Protocol.
PD policy engine using 32-bit RISC controller with
8kB data RAM and 48kB code ROM.
PD mode configuration through external EEPROM.
Options to use external MCU controlling PD policy
through I2C interface.
Up to 8 Configurable PD GPIO pins support.
External MCU support through I2C bus.
External EEPROM support for USB device
configuration and PD profile.
Single channel USB to serial / parallel ports with
a variety of configurations.
En...
Similar Datasheet