High Speed USB Bridge
FT4233H HIGH SPEED USB BRIDGE WITH TYPE-C/PD CONTROLLER Datasheet
Version 1.0
Document No.: FT_001432 Clearance No.: FTD...
Description
FT4233H HIGH SPEED USB BRIDGE WITH TYPE-C/PD CONTROLLER Datasheet
Version 1.0
Document No.: FT_001432 Clearance No.: FTDI#547
Future Technology Devices International Ltd
FT4233H
( High Speed USB Bridge with Type-C/PD Controller )
The FT4233H is a Hi-Speed USB device with a TypeC/PD controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 4 independent channels compatible with the FT4232H – Quad Hi-speed USB to multipurpose UART/MPSSE solution.
The FT4233H has the following advanced features:
Support PD specification Rev 3.0.
Port1 mode configuration for Sink or Dual-role,
supporting Fast Role Swap
Port2 works as Sink, supporting charge through
to port1
Support 5V, 9V, 15V and 20V PDOs as sink or
source
Type-C/PD Physical Layer Protocol
PD policy engine using 32-bit RISC controller
with 8kB data RAM and 48kB code ROM Support PD capability descriptors and requests
Options to use external MCU controlling PD policy through I2C interface
USB to quad serial ports with a variety of configurations.
Entire USB protocol handled on the chip. No USB
specific firmware programming required.
USB 2.0 High Speed (480Mbits/Second) and Full
Speed (12Mbits/Second) compatible.
Two Multi-Protocol Synchronous Serial Engine
(MPSSE) on channel A and cha...
Similar Datasheet