www.DataSheet4U.com
ISSUED DATE :2004/10/07 REVISED DATE :
G177
Description
Single Output Hall Effect Latch IC
The G1...
www.DataSheet4U.com
ISSUED DATE :2004/10/07 REVISED DATE :
G177
Description
Single Output Hall Effect Latch IC
The G177 is an integrated Hall effect latched sensor with output pull-high resistor driver designed for electronic commutation of brushless DC motor applications and contactless switches. The device includes an on-chip Hall
voltage generator for magnetic sensing, a comparator that amplifies the Hall
voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and output driver with pull-high resistor. An internal bandgap regulator is used to provide temperature compensated supply
voltage for internal circuits and allows a wide operating supply range. If a magnetic flux density larger than threshold Bop, DO is turned on (low). The output state is held until a magnetic flux density reversal falls below Brp causing DO to be turned off (high). G177 is rated for operation over temperature range from -20 to 100 and
voltage range from 3.5V to 28V. The devices are available in low cost die forms or rugged 3 pin SIP packages.
Features
* Wide range of supply
voltage: 3.5V to 28V. * Internal bandgap regulator allows temperature compensated operations and a wide operating
voltage range. * High sensitivity with a small magnet. * TTL and MOS ICs directly drivable by output. * Build in protection diode for chip reverse power connecting.
Application
1)Brushless DC Motor 2)Brushless DC Fan 3)Position Sensors 4)Rotation Sensors 5)Revolution Counting 6)Speed...