BABT Approved Relay
BABT Approved Relay Meeting the Requirements of EN41003:1993 as endorsed, formerly BS6301:1989 Amendment 5 for Supplementary Isolation
BABT Approved No. CR/0098. Height of only 8mm from PCB.
www.DataSheet4U.com
G6A–BS
BABT
Wide switching load – 10µA to 2A. Fully sealed construction.
Ordering Information
Single-side Stable Type
Model G6A–234P–BS Note: Contact Form – DPDT Classification Contact Type – Bifurcated crossbar Contact Material – AgPd+Au clad Structure – Plastic se.
BABT Approved Relay
BABT Approved Relay
BABT Approved Relay Meeting the Requirements of EN41003:1993 as endorsed, formerly BS6301:1989 Amendment 5 for Supplementary Isolation
BABT Approved No. CR/0098. Height of only 8mm from PCB.
www.DataSheet4U.com
G6A–BS
BABT
Wide switching load – 10µA to 2A. Fully sealed construction.
Ordering Information
Single-side Stable Type
Model G6A–234P–BS Note: Contact Form – DPDT Classification Contact Type – Bifurcated crossbar Contact Material – AgPd+Au clad Structure – Plastic sealed
When ordering, add the rated coil voltage to the model number. Example: G6A-234P-BS 12 VDC Rated coil voltage
Specifications
Coil Ratings
General purpose, DPDT Relays
Rated voltage (VDC) Rated current (mA) Coil resistance (Ω) Coil inductance Armature OFF (H) (ref. value) Armature ON Must operate voltage Must release voltage Max. voltage Power consumption 3 93.8 32 0.07 0.065 4.5 62.5 72 0.16 0.14 5 56.2 89 0.2 0.18 6 46.5 129 0.29 0.26 9 31.1 289 0.63 0.57 12 23.3 514 1.1 1.06 24 11.7 2,057 4.5 4.1 48 7.0 6,882 13.7 12.5
70% max. of rated voltage 10% min. of rated voltage 150% of rated voltage at 23_C, 150% at 70_C Approx. 280 mW Approx. 330 mW
Contact Ratings
Item Load Rated load Contact material Rated carry current Max. switching voltage Max. switching current Max. switching capacity Min. permissible load Resistive load (cos∅ = 1) 0.3 A at 125 VAC; 1 A at 30 VDC AgPd (Au-clad) 3A 250 VAC, 220 VDC DC: 2A; AC: 2 A 125 VA, 60 W 0.01 mA at 10 mVDC DC: 1 A; AC: 1 A 62.5 VA, 30 W .