GP1A23LC

GP1A05/GP1A22LC/GP1A23LC/GP1A25LC GP1A05/GP1A22LC/ GP1A23LC/GP1A25LC s Features 1. Uses 3-pin connector terminal 2. High sensing accuracy ( Slit width : 0.5mm ) 3. Wide gap between light emitter and detector ( 5mm ) OPIC Photointerrupter with Connector s Applications 1. Copiers, Printers 2. Facsimiles * “ OPIC ” ( Optical IC ) is a trademark of SHARP Corporation. An OPIC consists of a light-detecting element and signal-processing circuit integrated onto a single chip. s Outline Dimensions GP1A05 2.0 3.5 11.0 ± 0.3 ( Unit : mm ) GP1A22LC ( Same as GP1A05 except connector ) 34.0 15.0 5.0 5.0 3.0 7.5 10.5 (10.4) Slit width 0.5 g 3 2 7.0 3.5 1.0MAXg 2 φ 3.0 ± 0.1Depth2.0 φ 4.2 ± 0.2 11.0 3 2 g1 1 1 V CC 2 GND 3 VO 1 1 V CC 2 GND 3 VO ( 9.2 ) 5.5 ± 1.0 (2.5) (2.5) * ( ) : Reference dimensions g 2 protrusion of connector from holder: MAX.1.0 g 1 JAPAN SOLDERLESS TERMINAL MSG. CO., LTD. made connector B3P-SHF-1AA Recommended connectors on the inserted side Housing : H3P-SHF-AA Terminal : SHF-001T-0.8SS etc. gg C0.5 φ 0 4.0+ - 0.1 (2.5) (2.5) 11.0± 0.1 12.0± 0.1 g JAPAN AMP made EI 3-pin connector 171825-3 * Unspecified tolerances shall be as follows ; Dimensions(d) Tolerance d < 4.0 ± 0.2 4.0 <= d < 16.0 ± 0.3 16 <= d ± 0.5 * ( ) : Reference dimensions Recommended connectors on the inserted side 172053-3 etc. gg GP1A23LC ( Same as GP1A05 except connector ) 11.0± 0.3 5.5 ± 1.0 3.5 GP1A25LC ( Same as GP1A05 except connector ) 11.0 ± 0.3 1 V CC 2 GND 3 VO g 2...