OPIC Photointerrupter
GP1A50HR/GP1A51HR/GP1A52HR/GP1A53HR
GP1A50HR/GP1A51HR GP1A52HR/GP1A53HR
s Features
1. High sensing accuracy ( Slit widt...
Description
GP1A50HR/GP1A51HR/GP1A52HR/GP1A53HR
GP1A50HR/GP1A51HR GP1A52HR/GP1A53HR
s Features
1. High sensing accuracy ( Slit width : 0.5mm ) 2. LSTTL and TTL compatible output 3. Both-sides mounting type : GP1A50HR ( Gap: 3mm ) Either-side mounting type : GP1A51HR ( Gap: 3mm ) PWB mounting type : GP1A52HR ( Gap: 3mm ) GP1A53HR ( Gap: 5mm )
OPIC Photointerrupter
s Applications
1. OA equipment, such as printers, facsimiles, etc. 2. VCRs
*“ OPIC” ( Optical IC ) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip.
s Outline Dimensions
GP1A50HR 19.0 ± 0.2 5.0 6.0 GP1A51HR 2.0
( Unit : mm )
2 - φ 3.2 ± 0.2 25.0 ± 0.3 12.2 ± 0.3
0.2 3.0 + - 0.1
2 - C2.0 Slit width ( Both sides of 0.5 emitter and detector ) 1.5 ( Both sides of emitter and 5.0 detector ) 0.5 2- φ 3.2 ± 0.2 Slit width 7.5 7.0 6.0 10.0
0.3 0.1
12.2 ± 0.3 3.5 9.0MIN. 3.0 - 0.2 0.1
1A51HR +
3.5
1.5
7.5 10.0
9.0MIN.
7.0
5 - 0.4 -
+ 0.3 0.1
0.3 5 - 0.45 + - 0.1
0.3 5 - 0.4 + - 0.1
5 - 0.45+ 2 - (1.27) 12.0 18.0
(1.5) (9.2) 2 3
(1.27)
(1.27)
(1.5) (9.2)
1 4 5 Marking : 1A50HR GP1A52HR
S
A52
*Unspecified tolerances shall be as follows: Dimensions(d) Tolerance d<=6.0 ± 0.1 6.0< d<=18.0 ± 0.2 18.0< d<=25.0 ± 0.025 *( ) : Reference dimensions
5 4 3
1
2
*Unspecified tolerances shall be as follows : Dimensions(d) Tolerance d<=6.0 ± 0.1 6.0 < d<=18.0 ± 0.2 *( ) : Reference dimensions
1.5
3.5
12.2 ± 0.3 0.2 3.0 + - 0.1
1...
Similar Datasheet