GP1A57HRJ00F

www.DataSheet4U.com GP1A57HRJ00F GP1A57HRJ00F Gap : 10mm, Slit : 1.8mm *OPIC Output Case package Transmissive Photointerrupter ■ Description GP1A57HRJ00F is a standard, OPIC output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design. This device has a wide gap. ■ Agency approvals/Compliance 1. Compliant with RoHS directive ■ Applications 1. General purpose detection of object presence or motion. 2. Example : Printer, FAX, Optical storage unit ■ Features 1. Transmissive with OPIC output 2. Highlights : Vertical Slit for alternate motion detection Output Low Level at intercepting optical path Wide gap width (10mm) Positioning Pin to prevent misalignment 3. Key Parameters : Gap Width : 10mm Slit Width (detector side) : 1.8mm Package : 18.6×15.2×5mm 4. Lead free and RoHS directive compliant * "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signalprocessing Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Shee...