H22LTI

H22L SERIES OPTOLOGIC® OPTICAL INTERRUPTER SWITCH PACKAGE DIMENSIONS 0.472 (12.0) 0.457 (11.6) 0.249 (6.35) 0.243 (6.15) + E D + C L 0.39 (1.00) 0.34 (0.85) C L 0.129 (3.3) 0.119 (3.0) 0.103 (2.60) NOM 0.433 (11.0) 0.422 (10.7) Optical C L FEATURES Black plastic housing Choice of inverter or buffer output functions Choice of open-collector or totem-pole output configuration 0.315 (8.0) C L No contact switching TTL/CMOS compatible output functions 0.055 (1.40) 0.045 (1.14) 0.055 (1.40) 0.045 (1.14) 0.110 (2.8) 0.091 (2.3) PIN 1 ANODE PIN 2 CATHODE 2 3 4 1 5 PART NUMBER DEFINITIONS H22LTB H22LTI H22LOB H22LOI Totem-pole, buffer output Totem-pole, inverter output Open-collector, buffer output Open-collector, inverter output (Applies to Max Ratings and Characteristics Tables.) 0.295 (7.5) 0.272 (6.9) PIN 3 VCC PIN 4 VO 0.020 (0.51) (SQ) PIN 5 GND NOTES NOTES: 1. Dimensions for all drawings are in inches (millimeters). 2. Tolerance of ± .010 (.25) on all non-nominal dimensions unless otherwise specified. 3. Lead cross section is controlled between .050 (1.27) from the seating plane and the end of the leads. 1. Derate power dissipation linearly 1.67 mW/°C above 25°C. 2. Derate power dissipation linearly 2.50 mW/°C above 25°C. 3. RMA flux is recommended. 4. Methanol or isopropyl alcohols are recommended as cleaning agents. 5. Soldering iron 1/16” (1.6mm) from housing. 6. As long as leads are not under any stress or spring tension. ABSOLUTE MAXIMUM RATINGS...