DatasheetsPDF.com

HA9P5320-5 Datasheet

Part Number HA9P5320-5
Manufacturers Intersil Corporation
Logo Intersil Corporation
Description 1 Microsecond Precision Sample and Hold Amplifier
Datasheet HA9P5320-5 DatasheetHA9P5320-5 Datasheet (PDF)

HA-5320 Data Sheet April 1999 File Number 2857.4 1 Microsecond Precision Sample and Hold Amplifier The HA-5320 was designed for use in precision, high speed data acquisition systems. The circuit consists of an input transconductance amplifier capable of providing large amounts of charging current, a low leakage analog switch, and an output integrating amplifier. The analog switch sees virtual ground as its load; therefore, charge injection on the hold capacitor is constant over the entire input/.

  HA9P5320-5   HA9P5320-5






Part Number HA9P5320-9
Manufacturers Intersil Corporation
Logo Intersil Corporation
Description 1 Microsecond Precision Sample and Hold Amplifier
Datasheet HA9P5320-5 DatasheetHA9P5320-9 Datasheet (PDF)

HA-5320 Data Sheet April 1999 File Number 2857.4 1 Microsecond Precision Sample and Hold Amplifier The HA-5320 was designed for use in precision, high speed data acquisition systems. The circuit consists of an input transconductance amplifier capable of providing large amounts of charging current, a low leakage analog switch, and an output integrating amplifier. The analog switch sees virtual ground as its load; therefore, charge injection on the hold capacitor is constant over the entire input/.

  HA9P5320-5   HA9P5320-5







1 Microsecond Precision Sample and Hold Amplifier

HA-5320 Data Sheet April 1999 File Number 2857.4 1 Microsecond Precision Sample and Hold Amplifier The HA-5320 was designed for use in precision, high speed data acquisition systems. The circuit consists of an input transconductance amplifier capable of providing large amounts of charging current, a low leakage analog switch, and an output integrating amplifier. The analog switch sees virtual ground as its load; therefore, charge injection on the hold capacitor is constant over the entire input/output voltage range. The pedestal voltage resulting from this charge injection can be adjusted to zero by use of the offset adjust inputs. The device includes a hold capacitor. However, if improved droop rate is required at the expense of acquisition time, additional hold capacitance may be added externally. This monolithic device is manufactured using the Intersil Dielectric Isolation Process, minimizing stray capacitance and eliminating SCRs. This allows higher speed and latchfree operation. For further information, please see Application Note AN538. Features • Gain, DC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 106 V/V • Acquisition Time . . . . . . . . . . . . . . . . . . . . . 1.0µs (0.01%) • Droop Rate . . . . . . . . . . . . . . . . . . . . . . 0.08µV/µs (25oC) 17µV/µs (Full Temperature) • Aperture Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25ns • Hold Step Error (See Glossary) . . . . . . . . . . . . . . . . . 5mV • Internal Hold Capacito.


2005-03-22 : 12CWQ10FN    12H3020-2    12H3040-2    12TQ045S    MI31T    MI31TA    MI32T    MI32T-L    MI32TA    MI33T   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)