HIGH–FREQ ALUMINUM ELECTROLYTIC
HD SERIES
SUBMINIATURE (Radial Lead, Horizontal Deflection)
The NTE HD series of aluminu...
HIGH–FREQ ALUMINUM ELECTROLYTIC
HD SERIES
SUBMINIATURE (Radial Lead, Horizontal Deflection)
The NTE HD series of aluminum electrolytic non–polarized
capacitors are designed specifically for horizontal deflection current correction where high frequency and high ripple current occur.
MECHANICAL SPECIFICATIONS
Lead Solderability: Meets the requirements of MIL–STD 202, Method 208 Marking: Consists of series type, nominal capacitance, rated
voltage, temperature range, anode and/or cathode identification, NTE identification. Recommended Cleaning Solvents: Methanol, isopropanol ethanol, isobutanol, petroleum ether, propanol and/or commercial detergents. Halogenated hydrocarbon cleaning agents such as Freon (MF, TF, or TC), trichloroethylene, trichloroethane, or methylchloride are not recommended as they may damage the capacitor.
RATINGS
Capacitance Range: 1.0µf to 10µf Tolerance: ±20%
Voltage Range: 25 Volts and 50 Volts
PERFORMANCE SPECIFICATIONS
Operating Temperature Range: –25°C to +85°C (–13°F to +185°F) Leakage Current: I ≤ 0.2CV (measured after 5 minutes of applied rated
voltage) I = Leakage Current (µA) C = Nominal Capacitance (µf) V = Rated
Voltage (V) Capacitance Tolerance: ±20% (M) measured at +20°C (+68°F), 1kHZ Load Life: 1000 Hrs @ 12V DC, +70°C (+158°F), at specified ripple current Leakage Current: Initial specified value or less Dissipation Factor: < 200% of specified value Capacitance Change: Within ±15% of initial value Shelf Life: 500 Hrs @ +85°C (+185°F), no vo...