HLS30ZG

HLS30 Series – 30A Half-Brick DC/DC Converter 48V Input 5.0V, 3.3V, 2.5V Output Data Sheet Features Low profile (-11mm) single board design 1500VDC input to output isolation meets basic insulation High efficiency - to 92% at full load Start-up into high capacitive load Low conducted and radiated EMI Output overcurrent protection Output overvoltage protection Overtemperature protection Remote sense Set point accuracy ± 1% Remote on/off (primary referenced), positive or negative logic Output voltage trim adjust, positive or negative UL 1950 Recognized, CSA 22.2 No. 950-95 certified, TUV IEC950 Applications Distributed power architectures Telecommunications equipment LAN/WAN applications Data processing applications Description The new HLS30 series of high-density, single-output DC/DC converters, convert standard telecom and datacom voltages into isolated low voltage outputs. High efficiencies and a patent-pending board design create superior thermal transfer that enhances product reliability and eliminates the need for a heatsink. Selection Chart Model Input voltage VDC 36-75 36-75 36-75 Input current, max ADC 4.8 3.3 2.5 Output voltage VDC 5.0 3.3 2.5 Output rated current I rated ADC 30 30 30 Output Ripple/Noise, mV p-p 100 75 50 Typical Efficiency @ I rated % 91 89 88 HLS30ZG HLS30ZE HLS30ZD This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be follow...