PHASE SHIFTERS - ANALOG - CHIP
v03.0809
Typical Applications
The HMC247 is ideal for:
• Fiber Optics
3
• Military
...
PHASE SHIFTERS - ANALOG - CHIP
v03.0809
Typical Applications
The HMC247 is ideal for:
Fiber Optics
3
Military
Test Equipment
Functional Diagram
HMC247
400° ANALOG PHASE SHIFTER 5 - 18 GHz
Features
Wide Bandwidth: 5 - 18 GHz Phase Shift: >400° Single Positive
Voltage Control Small Size: 2.3 x 1.6 x 0.1 mm
General Description
The HMC247 is an Analog Phase Shifter die which is controlled via an analog control
voltage from 0 to +10V. The HMC247 provides a continuously variable phase shift of 0 to 300 degrees at 9 GHz, and 0 to 100 degrees at 18 GHz, with consistent insertion loss versus phase shift. The phase shift is monotonic with respect to the control
voltage. The control port has a modulation bandwidth of 50 MHz. The low insertion loss and compact size enable this part to be used in a wide range of applications, including the phase adjustment of clocks in fiber optic systems and test equipment. All data is measured with the chip in a 50 ohm test fixture, connected via 0.076 mm (3 mil) ribbon bonds of minimal length <0.31 mm (<12 mils).
Electrical Specifications, TA = +25° C, 50 Ohm System
Phase Shift Range: Insertion Loss
Parameter
Frequency (GHz)
Min.
5 - 10 GHz
180
10 - 13 GHz
135
13 - 18 GHz
45
5 - 10 GHz 10 - 18 GHz
Return Loss (Input and Output)
5 - 18 GHz
Control
Voltage Range Modulation Bandwidth
5 - 18 GHz 5 - 18 GHz
Phase
Voltage Sensitivity
5 - 18 GHz
Insertion Phase Temperature Sensitivity
5 - 18 GHz
Typ. 400 200 120
8 4
8
0 - 1...