GaAs MMIC SUB-HARMONICALLY PUMPED MIXER
MIXERS - SUB-HARMONIC - CHIP
v02.1007
Typical Applications
The HMC264 is ideal for:
• Microwave Point-to-Point Radio...
Description
MIXERS - SUB-HARMONIC - CHIP
v02.1007
Typical Applications
The HMC264 is ideal for:
Microwave Point-to-Point Radios
3
LMDS
SATCOM
Functional Diagram
HMC264
GaAs MMIC SUB-HARMONICALLY PUMPED MIXER, 20 - 32 GHz
Features
Integrated LO Amplifier: -4 dBm Input Sub-Harmonically Pumped (x2) LO High 2LO/RF Isolation: 40 dB Small Size: 1.32 x 0.97 x 0.1 mm
General Description
The HMC264 chip is a sub-harmonically pumped (x2) MMIC mixer with an integrated LO amplifier which can be used as an upconverter or downconverter. The chip utilizes a GaAs PHEMT technology that results in a small overall chip area of 1.28mm2. The 2LO to RF isolation is excellent eliminating the need for additional filtering. The LO amplifier is a single bias (+3V to +4V) two stage design with only -4 dBm nominal drive requirement. All data is measured with the chip in a 50 ohm test fixture connected via 0.025 mm (1 mil) diameter wire bonds of minimal length <0.31 mm (<12 mils).
Electrical Specifications, TA = +25° C, As a Function of LO Drive & Vdd
Parameter
Frequency Range, RF Frequency Range, LO Frequency Range, IF Conversion Loss Noise Figure (SSB) 2LO to RF Isolation 2LO to IF Isolation IP3 (Input) 1 dB Gain Compression (Input) Supply Current (Idd)
IF = 1 GHz LO = 0 dBm & Vdd = +4V
Min.
Typ.
Max.
24 - 32
12 - 16
DC - 6
10
13
10
13
29
35
32
40
5
13
+3
+6
28
50
IF = 1 GHz LO = -4 dBm & Vdd = +4V
Min.
Typ.
Max.
20 - 30
10 - 15
DC - 6
10
12
10
12
29
40
29
40 ~ ...
Similar Datasheet