AMPLIFIERS - LOW NOISE - SMT
v03.0610
7 Typical Applications The HMC356LP3 / HMC356LP3E is ideal for basestation receiv...
AMPLIFIERS - LOW NOISE - SMT
v03.0610
7 Typical Applications The HMC356LP3 / HMC356LP3E is ideal for basestation receivers: GSM 450 & GSM 480 CDMA 450 Private Land Mobile Radio
Functional Diagram
HMC356LP3 / 356LP3E
GaAs PHEMT MMIC LOW NOISE AMPLIFIER, 350 - 550 MHz
Features
Noise Figure: ≤1.0 dB +38 dBm Output IP3 Gain: 17 dB Very Stable Gain vs. Supply & Temperature Single Supply: +5V @ 104 mA 50 Ohm Matched Output
General Description
The HMC356LP3 & HMC356LP3E are high dynamic range GaAs PHEMT MMIC Low Noise
Amplifiers is ideal for GSM & CDMA cellular basestation and Mobile Radio front-end receivers operating between 350 and 550 MHz. This LNA has been optimized to provide 1.0 dB noise figure, 17 dB gain and +38 dBm output IP3 from a single supply of +5V @ 104 mA. Input and output return losses are 15 dB typical, with the LNA requiring only four external components to optimize the RF input match, RF ground and DC bias. For applications which require improved noise figure, please see the HMC616LP3(E).
Electrical Specifications, TA = +25° C, Vs = +5V
Frequency Range Gain
Parameter
Gain Variation Over Temperature
Noise Figure Input Return Loss Output Return Loss Reverse Isolation Output Power for 1dB Compression (P1dB) Saturated Output Power (Psat) Output Third Order Intercept (IP3) (-20 dBm Input Power per tone, 1 MHz tone spacing) Supply Current (Idd)
Min.
Typ.
Max.
350 - 550
15
17
0.0032
0.010
1.0
1.4
17
12
24
17
21
22.5
34
38
104
Units MHz ...