GaAs HBT MMIC
FREQUENCY DIVIDERS - CHIP
v04.0109
1 Typical Applications Prescaler for DC to X Band PLL Applications: • Satellite Comm...
Description
FREQUENCY DIVIDERS - CHIP
v04.0109
1 Typical Applications Prescaler for DC to X Band PLL Applications: Satellite Communication Systems Fiber Optic Point-to-Point and Point-to-Multi-Point Radios VSAT
HMC363
GaAs HBT MMIC DIVIDE-BY-8, DC - 12 GHz
Features
Ultra Low SSB Phase Noise: -153 dBc/Hz Wide Bandwidth Output Power: -6 dBm Single DC Supply: +5V Small Size: 1.45 x 0.69 x 0.1 mm
Functional Diagram
General Description
The HMC363 is a low noise Divide-by-8 Static Divider with InGaP GaAs HBT technology that has a small size of 1.45 x 0.69 mm. This device operates from DC (with a square wave input) to 12 GHz input frequency with a single +5V DC supply. The low additive SSB phase noise of -153 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc = 5V
Parameter
Conditions
Min.
Maximum Input Frequency Minimum Input Frequency
12 Sine Wave Input. [1]
Input Power Range
Fin = 1 to 8 GHz
-15
Fin = 8 to 10 GHz
-10
Output Power [2]
Fin = 10 to 12 GHz
-5
Fin = 12 GHz
-9
Reverse Leakage
Both RF Outputs Terminated
SSB Phase Noise (100 kHz offset)
Pin = 0 dBm, Fin = 6 GHz
Output Transition Time Supply Current (Icc) [2]
Pin = 0 dBm, Fout = 882 MHz
[1] Divider will operate down to DC for square-wave input signal. [2] When operated in low power mode (pin 8 floating).
Typ. 13 0.2 >-20 >-15 >-8 -6 60 -153 100 70
Max.
0.5 +10 +2
0
Units GHz GHz dBm dBm dBm dBm dB dBc/Hz ps mA...
Similar Datasheet