HMC437MS8GE

Frequency Dividers & Detectors - SMT HMC437MS8G / 437MS8GE v05.1211 SMT GaAs HBT MMIC DIVIDE-BY-3, DC - 7 GHz Typical Applications 4 Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 802.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Features SSB Phase Noise: -153 dBc/Hz @100KHz Wide Bandwidth Output Power: -1 dBm Single DC Supply: +5V @ 69 mA MS8G SMT Package Functional Diagram General Description The HMC437MS8G & HMC437MS8GE are low noise Divide-by-3 Static Dividers utilizing InGaP GaAs HBT technology in low cost 8 lead surface mount plastic packages. This device operates from DC (with a square wave input) to 7 GHz input frequency from a single +5V DC supply. The low additive SSB phase noise of -153 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V Parameter Conditions Maximum Input Frequency Minimum Input Frequency Sine Wave Input [1] Input Power Range Fin= 1 to 6 GHz Fin= 6 to 7 GHz Output Power Reverse Leakage Both RF Outputs Terminated SSB Phase Noise (100 kHz offset) Pin= 0 dBm, Fin= 6 GHz Output Transition Time Pin= 0 dBm, Fout= 882 MHz Supply Current (Icc) 1. Divider will operate down to DC for square-wave input signal. Min. Typ. Max. Units 7.0 7.5 GHz 0.1 GHz -12 +12 dBm -10 +10 dBm -4 -1 dBm -50 dBm -153 dBc/Hz 100 ps 69 mA 4-1 IrrliniecgfseohpntrsFomsenoaosftiisir...