SMT GaAs HBT MMIC
FREQUENCY DIVIDERS & DETECTORS - SMT
HMC438MS8G / 438MS8GE
v07.1019
SMT GaAs HBT MMIC DIVIDE-BY-5, DC - 7 GHz
Typica...
Description
FREQUENCY DIVIDERS & DETECTORS - SMT
HMC438MS8G / 438MS8GE
v07.1019
SMT GaAs HBT MMIC DIVIDE-BY-5, DC - 7 GHz
Typical Applications
4
Prescaler for DC to C Band PLL Applications:
UNII, Point-to-Point & VSAT Radios
802.11a & HiperLAN WLAN
Fiber Optic
Cellular / 3G Infrastructure
Features
SSB Phase Noise: -153 dBc/Hz @100 kHz Wide Bandwidth Output Power: -1 dBm Single DC Supply: +5V @ 80 mA MS8G SMT Package
Functional Diagram
General Description
The HMC438MS8G & HMC438MS8GE are low noise Divide-by-5 Static Dividers utilizing InGaP GaAs HBT technology in low cost 8 lead surface mount plastic packages. This device operates from DC (with a square wave input) to 7 GHz input frequency from a single +5V DC supply. The low additive SSB phase noise of -153 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V
Parameter Maximum Input Frequency Minimum Input Frequency Input Power Range
Output Power Reverse Leakage SSB Phase Noise (100 kHz offset) Output Transition Time Supply Current (Icc)
Conditions
Sine Wave Input [1] Fin= 1 to 5 GHz Fin= 5 to 6 GHz Fin= 6 to 7 GHz
Both RF Outputs Terminated Pin= 0 dBm, Fin= 6 GHz
Pin= 0 dBm, Fout= 882 MHz
Min.
Typ.
Max.
Units
7.0
7.5
GHz
0.1
GHz
-15
+12
dBm
-15
+10
dBm
-15
+5
dBm
-4
-1
dBm
-50
dBm
-153
dBc/Hz
100
ps
80
mA
4-1
1. Divider will operate down to DC for square-wave input signal. InFfoormraptiorincfeu...
Similar Datasheet