v06.0514
HMC678LC3C
13 Gbps, 2:1 SELECTOR w/ PROGRAMMABLE OUTPUT VOLTAGE
High Speed Digital Logic - SMT
Typical Appli...
v06.0514
HMC678LC3C
13 Gbps, 2:1 SELECTOR w/ PROGRAMMABLE OUTPUT
VOLTAGE
High Speed Digital Logic - SMT
Typical Applications
The HMC678LC3C is ideal for: 2:1 Multiplexer up to 13 Gbps RF ATE Applications Broadband Test & Measurement Serial Data Transmission up to 13 Gbps Redundant Path Switching Built-in Test
Functional Diagram
Features
Supports High Data Rates: up to 13 Gbps
Single-ended inputs
Differential & Single-ended outputs
Fast Rise and Fall Times: 19 / 18 ps
Low Power Consumption: 250 mW typ.
Programmable Differential Output
Voltage Swing: 600 - 1200 mV
Propagation Delay: 125 ps
Single Supply: -3.3V
16 Lead Ceramic 3x3mm SMT Package: 9mm2
General Description
The HMC678LC3C is a 2:1 Selector designed to support data transmission rates of up to 13 Gbps, and selector port operation of up to 13 GHz. The selector routes one of the two single-ended inputs to the differential output upon assertion of the proper select port. The HMC678LC3C also features an output level control pin, VR, which allows for loss compensation or for signal level optimization.
All single-ended input signals to the HMC678LC3C are terminated with 50 Ohms to ground on-chip, and may be either AC or DC coupled. The outputs of the HMC678LC3C may be operated either differentially or single-ended. Outputs can be connected directly to a 50 Ohm terminated system, while DC blocking
capacitors may be used if the terminating system is 50 Ohms to a non-ground DC
voltage. The HMC678LC3C operates f...