HS1B-2700RH-Q Datasheet - Low Power/ High Performance Radiation Hardened Operational Amplifier

HS-2700RH Data Sheet August 1999 File Number 3624.2 Low Power, High Performance Radiation Hardened Operational Ampliﬁer...

HS-2700RH Data Sheet August 1999 File Number 3624.2 Low Power, High Performance Radiation Hardened Operational Ampliﬁer HS-2700RH is radiation hardened internally compensated operational ampliﬁers which employ dielectric isolation to achieve excellent DC and dynamic performance with very low quiescent power consumption. DC performance of the ampliﬁer input is characterized by high CMRR (106dB), low offset voltage (0.5mV), along with low bias and offset current (5.0nA and 2.5nA respectively). These input speciﬁcations, in conjunction with offset null capability and open-loop gain of 300,000V/V, enable HS-2700RH to provide accurate, high-gain signal ampliﬁcation. Gain bandwidth 1MHz and slew rate of 20V/µs allow for processing of fast, wideband signals. Input and output signal amplitudes of at least ±11V can be accommodated while providing output drive capability of 10mA. For maximum reliability, the output is protected in the event of short circuits to ground. The ampliﬁer operates from a wide range of supplies (±5.5V to ±20V) with a maximum quiescent supply drain of only 150µA. HS-2700RH is therefore, ideally suited to low-power instrumentation and ﬁltering applications that require fast, accurate response over a wide range of signal frequency. Speciﬁcations for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering. Detailed Electrical Speciﬁcations for these devices are contained in SMD 59...