DatasheetsPDF.com

HS9-26CT31RH-8 Datasheet

Part Number HS9-26CT31RH-8
Manufacturers Intersil Corporation
Logo Intersil Corporation
Description Radiation Hardened Quad Differential Line Driver
Datasheet HS9-26CT31RH-8 DatasheetHS9-26CT31RH-8 Datasheet (PDF)

HS-26CT31RH Data Sheet August 1999 File Number 2929.2 Radiation Hardened Quad Differential Line Driver The Intersil HS-26CT31RH is a quad differential line driver designed for digital data transmission over balanced lines and meets the requirements of EIA standard RS-422. Radiation hardened CMOS processing assures low power consumption, high speed, and reliable operation in the most severe radiation environments. The HS-26CT31RH accepts TTL signal levels and converts them to RS-422 compatible o.

  HS9-26CT31RH-8   HS9-26CT31RH-8






Part Number HS9-26CT31RH-Q
Manufacturers Intersil Corporation
Logo Intersil Corporation
Description Radiation Hardened Quad Differential Line Driver
Datasheet HS9-26CT31RH-8 DatasheetHS9-26CT31RH-Q Datasheet (PDF)

HS-26CT31RH Data Sheet August 1999 File Number 2929.2 Radiation Hardened Quad Differential Line Driver The Intersil HS-26CT31RH is a quad differential line driver designed for digital data transmission over balanced lines and meets the requirements of EIA standard RS-422. Radiation hardened CMOS processing assures low power consumption, high speed, and reliable operation in the most severe radiation environments. The HS-26CT31RH accepts TTL signal levels and converts them to RS-422 compatible o.

  HS9-26CT31RH-8   HS9-26CT31RH-8







Radiation Hardened Quad Differential Line Driver

HS-26CT31RH Data Sheet August 1999 File Number 2929.2 Radiation Hardened Quad Differential Line Driver The Intersil HS-26CT31RH is a quad differential line driver designed for digital data transmission over balanced lines and meets the requirements of EIA standard RS-422. Radiation hardened CMOS processing assures low power consumption, high speed, and reliable operation in the most severe radiation environments. The HS-26CT31RH accepts TTL signal levels and converts them to RS-422 compatible outputs. This circuit uses special outputs that enable the drivers to power down without loading down the bus. Enable and disable pins allow several devices to be connected to the same data source and addressed independently. Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering. Detailed Electrical Specifications for these devices are contained in SMD 5962-95632. A “hot-link” is provided on our homepage for downloading. http://www.intersil.com/spacedefense/space.htm Features • Electronically Screened to SMD #5962-95632 • QML Qualified Per MIL-PRF-38535 Requirements • 1.2 Micron Radiation Hardened CMOS • Total Dose Up to 300kRAD(Si) • Latchup Free • EIA RS-422 Compatible Outputs (Except for IOS) • TTL Compatible Inputs • High Impedance Outputs when Disabled or Powered Down • Low Power Dissipation 2.75mW Standby (Max) • Single 5V Supply • Low Output Impedance 10Ω or Less • Full -55oC to.


2005-03-26 : HYB3116160BSJ    HYB3116160BSJ-50    HYB3116160BSJ-60    HYB3116160BSJ-70    HYB3116160BST-50    HYB3116160BST-60    HYB3116160BST-70    HYB3116400BJ-50    HYB3116400BJ-60    HYB3116400BJ-70   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)